The Cummins CP2600D4/E Dry Prime Trash Pump provides optimum performance and versatility for water and waste water applications. The 6″ pump is capable of handling 3 inch diameter solids and flow capacities up to 2600 gpm. An optional sound-attenuated enclosure is available for applications with low noise requirements.
PUMP FEATURES
- QSF6X6 Venturi Dry Prime Centrifugal Pump.
- Suction & Discharge: 6 inch.
- Priming: The exclusive ENVIROPRIME dry-priming system works in conjunction with the Cummins 6.5 cfm engine mounted compressor/venturi priming system. Fully-automatic, dry priming – automatic priming and re-priming up to 28 feet of vertical lift.
- Applications: Ideal for dewatering, sewer/stream bypass, water transfer, wastewater transfer, mine dewatering, salt water disposal, and emergency water removal.
- Casing and Wear Ring: Ductile iron, class 30.
- Impeller: Two vane with rear equalizing vanes – non-clogging, enclosed, class 65-45-12 ductile iron.
- Seal: Dry-running, grease lubricated, mechanical type. Tungsten carbide rotating face with silicon carbide stationary seal faces.
- Valve and Air Chamber: Flanged to suction of heavy-duty, self-priming, centrifugal pump. Single 204 stainless steel float mounted on a steel cover, easily removable. Nitrile valve seat with single rod. Stainless steel supports, levers and all internal hardware. Prevents blow-by of pumpage.
- Solids Capacity: 3” diameter spherical solids.
- Clean Outs: Ductile iron, fully accessible and removable.
- Discharge Priming Valve: Valmatic® check valve.
- Flanges: ANSI #150 steel.
ENGINE FEATURES
- Cummins QSF 2.8 diesel engine.
- EPA Tier 4 Final approved.
- DOC & EGR emissions control.
- Electric 12V starting.
- Electronic High Pressure Common Rail (HPCR) fuel system.
- 100 gallon fuel tank with electric fuel gauge, 3″ clean-out ports, and auxiliary fuel source connection.
CONTROL FEATURES
- Auto start / stop control panel with OLED display for visibility in bright sunlight with traditional key start operation.
- Manual speed control with programmable minimum and maximum speeds visible on display.
- Engine information display – oil pressure, coolant temperature, engine speed (rpm), battery voltage, fuel level in primary tank, and running hours.
- Displays engine diagnostic fault codes.
- Programmable maintenance alerts that will appear on the display.
- Prestart audible alarm in panel with an amber strobe light that will activate when the auto float engages..
- Failure to start audible alarm, plus additional connection for primary auto start/stop float control.
- Connection for automatic operation using a level or pressure transducer with float Backup and high-level alarm..
- Programmable weekly exercise timer.
- Programmable time start based on ambient temperatures.
- Input that can be used for low coolant, and low oil level.
- Electrical component rating IP67.
- 65ft Level floats included.
- Emergency stop button.
TRAILER
- Comes standard with reinforced step and safety handle, LED work lights, and beacon warning light.
- Folding trailer tongue makes the product easy to ship and store.
- DOT approved LED tail, side, brake, and directional lights.
- Safety chains with hooks.
- One front stabilizer jack and two rear stabilizer jacks.
- 5200 lb. single axle.
- 15″ tires.
- Electric brakes.
- Pintle hitch.
WARRANTY/SERVICE FEATURES
- Cummins 2-Year / 2000-Hour Warranty.
- Supported by a worldwide Cummins twenty-four hour, seven days-a-week, distributor network.
- Cummins warrants and services all unit components.
- Control panel is pre-programmed with Cummins fault codes for ease of service from remote locations.
- Remote mounting of the engine Electronic Control Module (ECM) allows rapid plug-in diagnostics and data downloads using electronic tools.
DOWNLOADS
OPTIONAL ENCLOSURE
- Sound attenuated enclosure for residential and other low-noise applications.
- Less than 67 dBA at 30ft.
Reviews
There are no reviews yet.