Gillette SPMI-1M Standby Generator (1000kW)

The Gillette SPMI-1M Standby Generator offers a Mitsubishi diesel engine, numerous three phase voltage options, and up to 1000 kW of power.

FEATURES

All generator sets are USA prototype built and thoroughly tested. Production models are USA factory built and 100% load tested.
Solid state, frequency compensated voltage regulation is standard.
Basler DGC-2020 digital controller offers an integrated gen-set control system for single gen-set applications, and includes generator metering, engine-generator protections, exercise timer, and expansion capabilities. Controller has stop-run-auto mode buttons, menu scroll buttons, and a backlit LCD display.
Heavy-duty circuit breaker is standard on all gen-sets.
Battery tray, cables, straps, and charger included.
Meets NFPA-110 Level 1 when equipped with the necessary accessories and installed per NFPA standards.
UL-1446 Certified. Not UL2200 Listed.

OPEN STYLE – No Enclosure: Gen-set must be placed within a weather protected area, un-inhabited by humans or animals, with proper ventilation. Silencer and flexible exhaust hose are not supplied , as installation requirements are not known. However, these two items are available as optional equipment.
LEVEL 2 – Aluminum Housing: Full weather protection and superior sound attenuation for specific low noise applications. Critical grade silencer is standard. Average sound level of 88 dBA at 23 ft.

Feature double-walls and emergency vents. Designed for generator sub-base installation. UL-142 Certified.
Available in three sizes: 1800, 3600, & 5400 gallons for 24, 48, or 72 hours of runtime at full load.
Further descriptions and tank options available here.
Generator can also be used with customer-supplied fuel tank.

Engine Coolant Heater
Starting Battery Heater Blankets
10A Battery Charger Upgrade
20A Battery Charger Upgrade
Two 1000 CCA 12VDC Starting Batteries
Emergency Stop Switch – mounted in a NEMA 4X small enclosure, UL Listed, Suitable for remote locations, Complies with NFPA-110 requirements
Emergency Stop Switch – mounted in a “Break Glass Station” NEMA 3R small enclosure, UL Listed, Suitable for remote locations, Complies with NFPA-110 requirements
NFPA-110 Compliance Package: Includes 16 lamp dual (8) display remote annunciators (choice of flush-mount or surface-mount) and a heavy-duty 10A 12/24 VDC battery charger
External Permanent Magnet Generator (PMG) with Digital Voltage Regulator (DVR) for improved motor starting capabilities, un-interrupted excitation power, and RMS sensing
Critical Grade Silencer Upgrade – for average sound level of 99 dBA at 23 ft with an Open Gen-Set (standard with Level 2 Enclosure)
Hospital Grade Silencer Upgrade – for average sound level of 82 dBA at 23 ft in a Level 2 Enclosure
R7 Foam Insulation (4-5 dBA sound reduction)
Paralleling Package
Stainless Steel Enclosure
Generator Enclosure Lights
Liquid Containment Pan – installed under frame base
Spring Vibration Mounts
Motorized Dampers
Isolator Mounting Pads
Enclosure Space Heater
Controller Upgrades and Alarm Interfaces
Asco 300 Automatic Transfer Switch (See Accessories Tab for a partial listing or follow this link for a full listing)
Five Year Extended Warranty

Model	SPMI-1M
Standby Power Rating	Varies – See Model Chart
Phase	Three
Voltage	Varies – See Model Chart
Voltage Regulation	+/- 1/2%
Frequency	60Hz
Power Factor	0.8pf
Sound Level at 7m	Varies – See Enclosure Options
Engine	Mitsubishi, 4-cycle, 12-cylinder, Turbo-After-Cooler
Engine Starting System	Electric
Fuel Consumption	75.1 gallons per hour at full load
Dimensions LxWxH (inches)	Varies – See Enclosure Chart
Approximate Weight	Varies – See Enclosure Chart
Engine Warranty (Standby)	24 Months / 1000 hours
Generator Warranty (Standby)	24 Months / 1000 hours

Model