Asco 300 Power Meter 5210

The Asco 300 Power Meter 5210 monitors provides enhanced energy and power information.

FEATURES

• Enhanced monitoring features include power metering, energy consumption, and power demand.
• For use with Asco 300 transfer switches with Group G Controller – sized by transfer switch amp size.
• Setup provided from the front of the module includes CT rating (xxxxx:5), PT rating (xxxxxxx:120) (if applicable; 24000V maximum), System type (single or three phase; 3 or 4 wire), and Communication parameters.
• Continuous duty, long life, 4 line x 20 character LCD backlit display provides monitoring via menu scroll buttons.
• Capable of interfacing with an optional Quad Ethernet Module 72EE to permit information to be sent to a central location for display, analysis, and logging (when used with an Asco 300 transfer switch only).

LCD Display Monitoring

• Current per phase RMS and neutral (if applicable).
• Current Unbalance %.
• Voltage, phase to phase and phase to neutral.
• Voltage Unbalance %.
• Real power (kW): per phase and 3 phase total.
• Apparent power (kVA): per phase and 3 phase total.
• Reactive power (kVAR): per phase and 3 phase total.
• Power factor: per phase and 3 phase total.
• Frequency.
• Accumalted Energy, (MWH,MVAH, and MVARH).
• Total harmonic distortion.

Optional Monitoring with 72EE Module

• Current per phase RMS and neutral (if applicable).
• Current Unbalance %.
• Voltage, phase to phase and phase to neutral.
• Voltage Unbalance %.
• Real power (kW): per phase and 3 phase total.
• Apparent power (kVA): per phase and 3 phase total.
• Reactive power (kVAR): per phase and 3 phase total.
• Power factor: per phase and 3 phase total.
• Frequency.
• Accumalted Energy, (MWH,MVAH, and MVARH).
• Total harmonic distortion.
• Accumulated real energy KWH.
• Accumulated reactive energy KVAH.
• Accumulated apparent energy KVARH.

Please Note: Power Meter 5210 cannot be used with Asco 300 Load Current Metering Cards (Accessory 23GA/23GB).